Indiana Well Data › Putnam County › Cloverdale (46120)
Cloverdale, IN (46120): well depth, water level & drilling cost
✓ 528 IDNR records · Putnam County
Pull every recorded well near a Cloverdale (46120) address — $49
How deep are wells in and around Cloverdale (46120), Indiana?
The median drilled well depth in and around Cloverdale (46120) is 125 ft, based on 492 wells with recorded depths in the state IDNR database. Half fall between 90 ft and 180 ft; 90% are shallower than 252 ft.
How much does it cost to drill a well in and around Cloverdale (46120)?
Applying published per-foot rates to the local median depth of 125 ft: drilling and casing alone typically runs $3,125–$8,125; a complete system including pump, pressure tank, and hookup typically runs $7,500–$12,500. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Cloverdale (46120)?
The median static water level is 35 ft below ground surface (middle half of wells: 20 ft–60 ft), from 428 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Putnam County.
Part of Putnam County well records.
Method: medians computed from IDNR records (filed water-well records from the Indiana DNR Division of Water (the public dataset carries no well-use code, so all records are included); depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.