⟁ Indiana Well Data field records · 2026 survey

Indiana Well Data › Marshall County › Donaldson (46513)

Donaldson, IN (46513): well depth, water level & drilling cost

✓ 897 IDNR records · Marshall County

72 ftmedian well depth
60 ft–91 fttypical depth range
20 ftmedian static water level
30 gpmmedian yield (819 tests)

Pull every recorded well near a Donaldson (46513) address — $49

How deep are wells in and around Donaldson (46513), Indiana?

The median drilled well depth in and around Donaldson (46513) is 72 ft, based on 883 wells with recorded depths in the state IDNR database. Half fall between 60 ft and 91 ft; 90% are shallower than 108 ft.

How much does it cost to drill a well in and around Donaldson (46513)?

Applying published per-foot rates to the local median depth of 72 ft: drilling and casing alone typically runs $1,800–$4,680; a complete system including pump, pressure tank, and hookup typically runs $4,320–$7,200. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Donaldson (46513)?

The median static water level is 20 ft below ground surface (middle half of wells: 12 ft–34 ft), from 846 measurements.

Drilled depth distribution

0–50 ft 118 50–100 ft 633 100–150 ft 120 150–200 ft 9 200–300 ft 1 300–400 ft 2 400–600 ft 0 600+ ft 0
Looking at a specific property in Donaldson (46513)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Donaldson (46513)

Free. Goes to licensed drillers working Marshall County.

Part of Marshall County well records.

Method: medians computed from IDNR records (filed water-well records from the Indiana DNR Division of Water (the public dataset carries no well-use code, so all records are included); depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.