⟁ Indiana Well Data field records · 2026 survey

Indiana Well Data › Elkhart County › Nappanee (46550)

Nappanee, IN (46550): well depth, water level & drilling cost

✓ 1,569 IDNR records · Elkhart County

90 ftmedian well depth
68 ft–118 fttypical depth range
30 ftmedian static water level
35 gpmmedian yield (1,243 tests)

Pull every recorded well near a Nappanee (46550) address — $49

How deep are wells in and around Nappanee (46550), Indiana?

The median drilled well depth in and around Nappanee (46550) is 90 ft, based on 1,542 wells with recorded depths in the state IDNR database. Half fall between 68 ft and 118 ft; 90% are shallower than 143 ft.

How much does it cost to drill a well in and around Nappanee (46550)?

Applying published per-foot rates to the local median depth of 90 ft: drilling and casing alone typically runs $2,250–$5,850; a complete system including pump, pressure tank, and hookup typically runs $5,400–$9,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Nappanee (46550)?

The median static water level is 30 ft below ground surface (middle half of wells: 19 ft–42 ft), from 1,506 measurements.

Drilled depth distribution

0–50 ft 123 50–100 ft 798 100–150 ft 503 150–200 ft 101 200–300 ft 14 300–400 ft 0 400–600 ft 3 600+ ft 0
Looking at a specific property in Nappanee (46550)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Nappanee (46550)

Free. Goes to licensed drillers working Elkhart County.

Part of Elkhart County well records.

Method: medians computed from IDNR records (filed water-well records from the Indiana DNR Division of Water (the public dataset carries no well-use code, so all records are included); depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.