⟁ Indiana Well Data field records · 2026 survey

Indiana Well Data › Bartholomew County › Clifford (47226)

Clifford, IN (47226): well depth, water level & drilling cost

✓ 153 IDNR records · Bartholomew County

55 ftmedian well depth
36 ft–74 fttypical depth range
15 ftmedian static water level
20 gpmmedian yield (100 tests)

Pull every recorded well near a Clifford (47226) address — $49

How deep are wells in and around Clifford (47226), Indiana?

The median drilled well depth in and around Clifford (47226) is 55 ft, based on 147 wells with recorded depths in the state IDNR database. Half fall between 36 ft and 74 ft; 90% are shallower than 98 ft.

How much does it cost to drill a well in and around Clifford (47226)?

Applying published per-foot rates to the local median depth of 55 ft: drilling and casing alone typically runs $1,375–$3,575; a complete system including pump, pressure tank, and hookup typically runs $3,300–$5,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Clifford (47226)?

The median static water level is 15 ft below ground surface (middle half of wells: 10 ft–20 ft), from 124 measurements.

Drilled depth distribution

0–50 ft 58 50–100 ft 75 100–150 ft 12 150–200 ft 1 200–300 ft 1 300–400 ft 0 400–600 ft 0 600+ ft 0
Looking at a specific property in Clifford (47226)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Clifford (47226)

Free. Goes to licensed drillers working Bartholomew County.

Part of Bartholomew County well records.

Method: medians computed from IDNR records (filed water-well records from the Indiana DNR Division of Water (the public dataset carries no well-use code, so all records are included); depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.