⟁ Indiana Well Data field records · 2026 survey

Indiana Well Data › Wayne County › Hagerstown (47346)

Hagerstown, IN (47346): well depth, water level & drilling cost

✓ 442 IDNR records · Wayne County

92 ftmedian well depth
63 ft–120 fttypical depth range
43 ftmedian static water level
15 gpmmedian yield (383 tests)

Pull every recorded well near a Hagerstown (47346) address — $49

How deep are wells in and around Hagerstown (47346), Indiana?

The median drilled well depth in and around Hagerstown (47346) is 92 ft, based on 421 wells with recorded depths in the state IDNR database. Half fall between 63 ft and 120 ft; 90% are shallower than 145 ft.

How much does it cost to drill a well in and around Hagerstown (47346)?

Applying published per-foot rates to the local median depth of 92 ft: drilling and casing alone typically runs $2,300–$5,980; a complete system including pump, pressure tank, and hookup typically runs $5,520–$9,200. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Hagerstown (47346)?

The median static water level is 43 ft below ground surface (middle half of wells: 25 ft–63 ft), from 395 measurements.

Drilled depth distribution

0–50 ft 64 50–100 ft 181 100–150 ft 138 150–200 ft 27 200–300 ft 9 300–400 ft 0 400–600 ft 0 600+ ft 2
Looking at a specific property in Hagerstown (47346)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Hagerstown (47346)

Free. Goes to licensed drillers working Wayne County.

Part of Wayne County well records.

Method: medians computed from IDNR records (filed water-well records from the Indiana DNR Division of Water (the public dataset carries no well-use code, so all records are included); depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.