Indiana Well Data › Monroe County › Stinesville (47464)
Stinesville, IN (47464): well depth, water level & drilling cost
✓ 147 IDNR records · Monroe County
Pull every recorded well near a Stinesville (47464) address — $49
How deep are wells in and around Stinesville (47464), Indiana?
The median drilled well depth in and around Stinesville (47464) is 120 ft, based on 145 wells with recorded depths in the state IDNR database. Half fall between 85 ft and 196 ft; 90% are shallower than 241 ft.
How much does it cost to drill a well in and around Stinesville (47464)?
Applying published per-foot rates to the local median depth of 120 ft: drilling and casing alone typically runs $3,000–$7,800; a complete system including pump, pressure tank, and hookup typically runs $7,200–$12,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Stinesville (47464)?
The median static water level is 44 ft below ground surface (middle half of wells: 21 ft–80 ft), from 126 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Monroe County.
Part of Monroe County well records.
Method: medians computed from IDNR records (filed water-well records from the Indiana DNR Division of Water (the public dataset carries no well-use code, so all records are included); depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.